3aleem
  • الرئيسية
  • الكورسات
  • الإعلانات المبوبة
  • المقالات
  • المنتدى
  • استطلاعات
  • المجموعات
  • الفيديوهات
  • تسجيل دُخول
  • اشترك!
  • Menu
  • ما الذي تبحث عنه اليوم؟

تسجيل دخول الأعضاء : إنشاء الحساب
إغلاق

تسجيل الدخول بالبريد الإلكتروني وكلمة المرور

 
 
نسيت كلمة المرور؟
ليس لديك حساب للإن؟ سجّل الآن

أنشئ حسابك

ستستخدم إيميلك لتسجيل الدخول دائماً

لا تقل عن ست أحرف أو أرقام

أدخل كلمة المرور مرة أخرى للتأكيد

سيستخدم في رابط صفحتك ،, مثال :
http://3aleem.com/se/profile/yourname

 
 
فعلاً عضو؟ تسجيل الدخول الأن
  • الرئيسية
  • الكورسات
  • الإعلانات المبوبة
  • المقالات
  • المنتدى
  • استطلاعات
  • المجموعات
  • الفيديوهات
×

معلومات العضو :

  • مشاهدات الملف : مشاهدة (٣٨)
  • الأصدقاء : (٠) صديق
  • أخر تحديث : ٥ يناير
  • إنضّم بتاريخ : ٣٠ نوفمبر، ٢٠٢٢
  • التحديثات
  • المعلومات
  • المقالات (3)

التحديثات

The post was not added to the feed. Please check your privacy settings.
  • Jinhongaaa111
    Jinhongaaa111 : قام بكتابة مقالة جديدة
    What Is The Success Or Failure Of Injection Molded Parts
    What Is The Success Or Failure Of Injection Molded Parts
    Cavity pressure
    Mold part cavity pressure is directly related to the finished part size. Changes in cavity pressure will change the dimensions of the part. The smaller the change, the stricter the size control or change. The higher the cavity pressure va...
    • #Injection mold maker
    • ٥ يناير
  • Jinhongaaa111
    Jinhongaaa111 : قام بكتابة مقالة جديدة
    What Are The Parts In The Ejector For
    Ejectors are pins or sleeves that push the plastic part out of the mold. The ejector feature creates an ejector pin or an ejector sleeve.
    Ejector sleeve with center pin
    The ejector pin is a steel pin located on the B side of the mold. Whe...
    • #ejector sleeve
    • ١٤ ديسمبر، ٢٠٢٢
  • Jinhongaaa111
    Jinhongaaa111 : قام بكتابة مقالة جديدة
    Necessary Presence Of Positioning And Guidance Systems
    Necessary Presence Of Positioning And Guidance Systems
    <!-- x-tinymce/html -->
    The problem with guiding and positioning is the repetitive staggered motion as the injection mold closes and opens. When the mold is closed, the guide pin and the guide bush lead to ensure that the mold parts have the c...
    • #Plastic mold factory
    • ٣٠ نوفمبر، ٢٠٢٢
  • Jinhongaaa111
    Jinhongaaa111 : لقد انضممت بالفعل حديثاً للشبكة .... وأرحب بالجميع !
    • ٣٠ نوفمبر، ٢٠٢٢
عرض المزيد ...
تحميل...

المعلومات

المقالات

  • What Is The Success Or Failure Of Injection Molded Parts

    نشرت في ٥ يناير

    Cavity pressure Mold part cavity pressure is directly related to the finished part size. Changes in cavity pressure will change the dimensions of the part. The smaller the change, the stricter the size control or change. The higher the cavity pressure value, the less t...

  • What Are The Parts In The Ejector For

    نشرت في ١٤ ديسمبر، ٢٠٢٢

    Ejectors are pins or sleeves that push the plastic part out of the mold. The ejector feature creates an ejector pin or an ejector sleeve. Ejector sleeve with center pin The ejector pin is a steel pin located on the B side of the mold. When the ejection ...

  • Necessary Presence Of Positioning And Guidance Systems

    نشرت في ٣٠ نوفمبر، ٢٠٢٢

    <!-- x-tinymce/html --> The problem with guiding and positioning is the repetitive staggered motion as the injection mold closes and opens. When the mold is closed, the guide pin and the guide bush lead to ensure that the mold parts have the correct initial ...

عرض جميع المقالات
3aleem
  • Like us on Facebook!
  • Follow us on Twitter!
  • الخصوصية
  • شروط الإستخدام
  • الإتصال
كافة الحقوق محفوظة ©2023 . بإدارة واحة الوسائط
Share